Ganter - Adjustable flat clamping levers, zinc die-cast, stainless steel bushing
Available in 18 variations
Available in 18 variations
- Grifflänge l1: 120 mm - 145 mm
- Connection hole d2:
- Connection thread d1:
- :
Variant table
available in 18 variations
There is currently no further information available on this article.
Adjustable flat clamping levers are characterised by their low overall height and timelessly elegant design.
They are preferably used when the swivel range is limited or a specific clamping position of the lever is desired. The threaded bushing / drill bushing is disengageably connected to the handle via serrations.
By lifting the lever hub, the serrations are released and the clamping lever can be swung into a most favourable clamping position. When "released", the clamping lever automatically engages again.
They are preferably used when the swivel range is limited or a specific clamping position of the lever is desired. The threaded bushing / drill bushing is disengageably connected to the handle via serrations.
By lifting the lever hub, the serrations are released and the clamping lever can be swung into a most favourable clamping position. When "released", the clamping lever automatically engages again.
Specifications
- : B 8
- : 16
- : 32
- : 29,5
- : 2
- : 41,5
- : 2,5
- Color: SR
- l1 (mm): 120
- : 14
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.