Halder - Centering clamping elements, with clamping segments
Available in 10 variations
Available in 10 variations
- Durchmesser d1 max.: 18 mm - 103 mm
- Durchmesser d1 min.: 14 mm - 87 mm
Variant table
available in 10 variations
There is currently no further information available on this article.
For centering and clamping of components with location hole. Precise self-centering with an accuracy of ±0.025mm. Due to the ground clamping segments, components with raw or machined surfaces can be centered frictionally and pulled down to the support points. The centering clamping element is characterized by large adjustment ranges and a low overall height.
Bolt-on option from above and below.
Material
Base body
- Tool steel, hardened, burnished
Spring
- Rust-free steel
Clamping segments
- Rust-free steel 1.4112, hardened and ground
Assembly
Installation instructions for assembly from above: Remove clamping plate and screw. Screw in grub screw from below and tighten from above via inner SW2.
Specifications
- : 3
- : 5
- : 12
- : 2
- : M4
- : M4
- : 2
- : 5,5
- : 4,5
- : 3
- : 5
- : 3,5
- : 18,5
- : 14,5
- : 12
- : 2
- : 14,3
- : 9,8
- : 8,6
- : 5,5
- : 19,3
- l1 (mm): 4,5
- : 2,3
- : 6
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.