Ganter - Compensation elements, high version, steel
Available in 32 variations
Available in 32 variations
- Außendurchmesser d1: 25 mm - 80 mm
- Bohrungsdurchmesser d2: 6 mm - 39 mm
- :
Variant table
available in 32 variations
There is currently no further information available on this article.
Compensation elements are used for levelling, adjusting and connecting. They consist of a screw upper part and a nut lower part. Via a fine thread a stepless and precise adjustment as well as readjustment by means of a hook wrench DIN 1810 is possible. A locking ring serves as a height limiter for the max. adjustment height. Normally the screw is permanently secured by the static load when the fixing screw is tightened. If this is not sufficient or if no fixing screw is used, form AK (with lock nut) is recommended.
Specifications
- : 40
- : 30,7
- : 25
- : 6,6
- : M 15 x 1
- : M 6
- : 33
- : 43
- : 10, 15
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.