Ganter - Exhaust valves, low design d1 M10X1
Item-No.: 13000016010
- d1: M10X1
- Öffnungsdruck: 20 mm
There is currently no further information available on this article.
Vent valves vent a container after the opening pressure specified in the table has been exceeded and thus protect against impermissibly high internal container pressure. In addition, they are characterised by their particularly compact dimensions.
A marking (form A) or a coloured ring (form B) in yellow (20 - 80 mbar) or green (160 - 240 mbar) serves to distinguish between different opening pressures.
The simple operating principle, pressure spring / ball, ensures permanent and trouble-free use of the single-acting valve. The installation position is vertically upwards.
Assembly note:
For wall thicknesses below 4 mm, use mounting nuts.
A marking (form A) or a coloured ring (form B) in yellow (20 - 80 mbar) or green (160 - 240 mbar) serves to distinguish between different opening pressures.
The simple operating principle, pressure spring / ball, ensures permanent and trouble-free use of the single-acting valve. The installation position is vertically upwards.
Assembly note:
For wall thicknesses below 4 mm, use mounting nuts.
Specifications
- : 18
- : 12
- : 14, 17
- : M 10 x 1
- : 14,5
- : 12,5
- : 16
- : 18,5
- : 16
- : 20
- : 80
- : 7
- l1 (mm): 6
- : 6
- l3 (mm): 8
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.