Ganter - Eyebolts, steel
Available in 18 variations
DIN 444
Available in 18 variations
- Länge l1: 50 mm - 160 mm
- :
Variant table
available in 18 variations
The eye bolts DIN 444 listed here are only an extract from the official standard sheet.
Manufactured in a precision design, as required in machine and fixture construction, the specified tolerances are smaller than those required in the DIN product classes.
Deviating from the official standard sheet, the steel version is manufactured in strength class 5.8 (in place of 4.6 / 5.6). In addition, the thread length l2 is greater.
Collar bolts can be used as bearing bolts for sizes M 6, M 8, M 10 and M 12.
Manufactured in a precision design, as required in machine and fixture construction, the specified tolerances are smaller than those required in the DIN product classes.
Deviating from the official standard sheet, the steel version is manufactured in strength class 5.8 (in place of 4.6 / 5.6). In addition, the thread length l2 is greater.
Collar bolts can be used as bearing bolts for sizes M 6, M 8, M 10 and M 12.
Specifications
- : M 6
- : 6
- : 14
- : 6
- l1 (mm): 50
- : 32
- : 7
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.