Ganter - Fitting screws Aufnahmedurchmesser d1 8 mm
Item-No.: 03000013112
ISO 7379
- Aufnahmedurchmesser d1: 8 mm
- Gewinde d2: M6
- Länge l1: 80 mm
Fitting bolts ISO 7379 are cost-saving design elements for a wide range of applications. The maximum possible tightening torque must not be based on strength class 12.9, but is limited by the relatively small contact surfaces (shoulders) at the recesses at the transition from d1 to d2 and d1 to d3. Deviation from the standard: - no information on concentricity 2 IT 13 and 2 IT 10 - no marking of the strength class - the official ISO standard sheet gives the following dimensions for d1 - d2: 6.5-M5 / 13-M10 / 25-M20 - the dimensions 4-M3 and 5-M4 are not included in the official ISO standard sheet
Specifications
- : 4
- : 8
- : M 6
- : 13
- l1 (mm): 80
- : 11
- l3 (mm): 5,5
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.