Go to home page
Phone: +49 7443 96729 0

Monday to Friday
08:00 to 12:00am and 02:00 to 05:00pm

Ganter - Flanges for ball joints GN 784

Available in 4 variations

Flanges for ball joints GN 784
Flanges for ball joints GN 784
Flanges for ball joints GN 784
Flanges for ball joints GN 784

Available in 4 variations

  • Durchmesser d1: 42 mm - 70 mm

You are currently in the B2B area. If you switch to B2C, you will be automatically unsubscribed.
Do you really want to switch to B2C?

from

€9.80 

excl. VAT plus shipping costs

Choose your product variant
Back to category
Selection filter
Durchmesser d1
42 mm
70 mm
Variant table
available in 4 variations
There is currently no further information available on this article.
Flanges are screwed onto ball joints from below, secured against rotation by a dowel pin. They thus allow the ball joints to be mounted from the top as well. The pitch circle d2 together with the three holes d3 are dimensioned so that commercially available standard screws can be used together with a washer. The dowel pin is mounted on the flange. The countersunk screw is enclosed loose.

Specifications

  • : 23
  • : 42
  • : 32,5
  • : 4,5
  • : M 5
  • : 2
  • : 6
  • : 8,5
  • m (mm): 7
  • : 2,5
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.