Halder - Holding ropes, spiral, with fixing rings, thermoplastic PUR
Available in 2 variations
Variant table
available in 2 variations
There is currently no further information available on this article.
These retaining ropes are designed to be attached to the EH 22340., EH 22350., EH 22370. and EH 22380. ball lock pins and the EH 22360. and EH 22400. socket pins and serve as an anti-loss device.
Material
Fixing ring
- Rustproof steel
Eye
- Brass, tinned
Holding rope
- Thermoplastic PUR, black, with filling thread
Sheathing of retaining cable
- Thermoplastic PUR, black
Assembly
Assembly of the retaining clips (Fig. 5 /6) on the ball lock pin using a soft-face hammer. Disassembly by levering out with screwdriver.
In the case of the thermoplastic design (Fig. 7), cut off protruding ends without burrs after fastening.
Spiral design (Fig. 8) with very long effective length.
Notes
Special design on request.
Designs Fig. 3 and Fig. 4 comply with MIL-DTL-83420.
Not for ball lock pins, simple design
.Specifications
- : 80
- : 600
- : PUR,schwarz
- l1 (mm): 100
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.