Manual test bench SAUTER TVL 100FHS71
Item-No.: 15003581001
In this bundle:
Wide jaw clampOpening width (inside the jaws): 0-6 mm, for tensile tests up to 500 N, thread... read more
Wide jaw clampOpening width (inside the jaws): 0-6 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of MaxEasy handling without tools, opening and closing of the jaws is done with attached knobs on the top. read less
The current technical data can be found in the corresponding data sheet or in the operating... read more
The current technical data can be found in the corresponding data sheet or in the operating instructions under Download. read less
Power supply adapter setGB/USA/AUS/CH etc., 4 pieces. Suitable for devices of protection class... read more
Power supply adapter setGB/USA/AUS/CH etc., 4 pieces. Suitable for devices of protection class II (without protective contact). Suitable for Euro contour plugs read less
The AFH LD software is designed for all applications where force is sought as a function of... read more
The AFH LD software is designed for all applications where force is sought as a function of distance. Typically, these force curves are required for penetration or pull-out tests. The program simultaneously queries the measurement data of a force gauge, e.g. SAUTER FH, and a length gauge, e.g. SAUTER LB or SAUTER LD.The measurement data of both instruments are continuously transmitted to the PC, synchronized by the software resp. and output as graphics as well as free data format for easy processing in Microsoft Excel®.The AFH FD or LD software is compatible with all instruments in the SAUTER FC, FH, FL seriesFurther evaluation functions:Expansion of the test objectTensile and compressive force load testArchiving of recorded dataScope of delivery SAUTER Software AFH LD on DVD Operating instructionsInterface cable RS-232 for FH (FH-A01)Interface cable RS-232 for FL (FL-A04) Interface cable USB for FL (FL-A01)Interface cable RS-232 for LB (LB-A01)Compatible with the following operating systems: Microsoft Windows 10Force-displacement software, but only in conjunction with a SAUTER LD series linear encoder read less
Rope and thread tension clampOpening width (within jaws): 0-5 mm, for tensile tests up to... read more
Rope and thread tension clampOpening width (within jaws): 0-5 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of Max.Easy handling without tools, test specimen can simply be wrapped around the screw and fastened via the clamping screw read less
Standard small clampOpening width (within jaws): 0-7 mm, for tensile tests up to 500 N, thread... read more
Standard small clampOpening width (within jaws): 0-7 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of Max.Easy handling without tools, opening and closing of the jaws is done with attached turning knob on the top side Pre-adjustment of the jaw opening via attached screwsPretensioning by means of installed springs read less
Cable pull-off clampOpening width (within jaws): 1.5-6 mm, for tensile tests up to 500 N,... read more
Cable pull-off clampOpening width (within jaws): 1.5-6 mm, for tensile tests up to 500 N, thread M6 Overload safety: 150 % of Max.Easy handling without tools, DUT can simply be inserted into the matching recess and tested. read less
Quality force measuring clamp in the lower force range with high variability for fast adaptation... read more
Quality force measuring clamp in the lower force range with high variability for fast adaptation to a wide range of test objectsSolid design for high clamping forcesMany different jaw types selectable- Jaws with pyramid grip as standard, W×H 32×20 mm- [[1]] Jaws with wave grip as well as special designsModular design allows quick adaptation, expansion and cleaning of the clampThe practical threaded rods with hexagon socket allow the clamp to be quickly adapted to your own requirements, test objects, application environments, e.g. test bench or measuring device, etcCan be used with all SAUTER force gauges or test rig systemsFor fastening the clamp to the force gauge, there is an M6 thread on the top of the clampFor tensile and compression tests up to 500 NOverload safety: 150 % of [Max]Scope of delivery: 1 clamp with 2 jaws with pyramid gripDimension drawing see www.sauter.eu read less
Data transfer software for force-time measurementsQuite a few force measurements take place... read more
Data transfer software for force-time measurementsQuite a few force measurements take place in very narrow time windows - sometimes even in just a few secondsThis fast transfer rate of up to 20 data per second can be achieved with the combination of SAUTER FH, FC or FL force gauges and AFH FAST softwareWith AFH FAST, a force-time curve can be recorded and the measurement data exported to Microsoft Excel®<Compatible with the following operating systems: Microsoft Windows 10 read less
RS-232/PC connection cable for connecting SAUTER series models to a PC
The AFH FD software is designed for all applications where the force is sought as a function... read more
The AFH FD software is designed for all applications where the force is sought as a function of distance. Typically, these force curves are required for penetration or pull-out tests.The program simultaneously queries the measurement data of a force gauge, e.g. SAUTER FH, and a length gauge, e.g. SAUTER LB or SAUTER LD.The measurement data from the two instruments are continuously transmitted to the PC, synchronized by the software or and output as a graphic and as a free data format for easy processing in Microsoft Excel®.The AFH FD or LD software is compatible with all instruments in the SAUTER FC, FH, FL series.These measuring instruments are usually used in conjunction with SAUTER test stands, in particular the SAUTER TVM-N series. However, they can also be used on mechanical testing machines.>br>Furtherevaluation functions:Expansion of the test objectTensileand compressive forceLoad testArchiving of the recorded dataScope of deliverySAUTER AFH FD or AFH LD:Software AFH FD or. LD on DVDInstruction manualInterface cableRS-232 for FH (FH-A01)Interfacecable RS-232 for FL (FL-A04)Interface cable USB for FL (FL-A01)Interface cable RS-232 for LB (LB-A01)Compatible with the following operating systems: Microsoft Windows 10Order examplefor a complete test system:FH 5K. (digital force gauge)LB 300-2. (digital length gauge)AFH FD (force-displacement software)TVM 5000N230N.* (test stand)LB-A02* (mounting LB to test stand)2× AFH 12 (RS-232/USB adapter)AC 04* (recording test object)963-163* (calibration force)961-150* (calibration length)* not mandatory for operation of AFH FD software read less
Scope of delivery: 2 piecesNote when ordering clamps individually:Clamps may require adapter... read more
Scope of delivery: 2 piecesNote when ordering clamps individually:Clamps may require adapter pieces for attachment. Please let us know with which devices the clamp is to be used. So we can supply the appropriate adapter pieces. read less
Strap tension clampOpening width (inside jaws): 0-6 mm, for tensile tests up to 500 N, thread... read more
Strap tension clampOpening width (inside jaws): 0-6 mm, for tensile tests up to 500 N, thread M6. Overload safety: 150 % of Max. Easy handling without tools, opening and closing of the jaws is done with the attached levers. read less
Strap tension clampOpening width (inside the jaws): 0-4 mm, for tensile tests up to 500 N,... read more
Strap tension clampOpening width (inside the jaws): 0-4 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of Max.Easy handling without tools, the opening and closing of the jaws is done with attached lever on the top. read less
Wedge clampOpening width (within jaws): 0-6 mm, for tensile tests up to 500 N, thread M6Overload... read more
Wedge clampOpening width (within jaws): 0-6 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of Max.Easy handling without tools, test specimen can simply be inserted into the open clamp. This closes automatically during a tensile test. read less
