Ganter - Oil sight glasses, aluminium / ESG glass, resistant up to 180 °C, blank
Available in 30 variations
Available in 30 variations
- Schauöffnung d1: 7 mm - 32 mm
- :
- :
Variant table
available in 30 variations
There is currently no further information available on this article.
The very sturdily dimensioned, scratch-resistant natural glass pane of the oil sight glasses is sealed via an O-ring on the pane circumference and not on the flat side, thus the tightness is independent of the axial contact pressure. The outer Ø of the oil sight glasses with the recessed hexagon is matched to the screw-in holes for pipe fittings DIN 3852. The sealing ring is embedded in a radial and plane recess; this means that the seal cannot be lost and, above all, cannot be squeezed out during tightening. Oil sight glasses can also be used for vessels which are under pressure; test series on the load capacity at overpressure and underpressure are available. Mounting instructions: Use mounting nuts for wall thicknesses below 4 mm.
Specifications
- : 14
- : M 20 x 1,5
- : 26
- l1 (mm): 8,5
- : 7,8
- : 23
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.