Ganter - Oil sight glasses, aluminium / natural glass, resistant up to 100°C, black anodized
Available in 30 variations
Variant table
available in 30 variations
There is currently no further information available on this article.
The very sturdily dimensioned, scratch-resistant natural glass pane of the oil sight glasses is sealed by an O-ring on the circumference of the pane, which means that the tightness is independent of an axial contact pressure.
The outer Ø of the oil sight glasses with the recessed hexagon is matched to the screw-in holes for pipe fittings DIN 3852.
The sealing ring is embedded in a radial and planar recess, thus the seal cannot be lost and cannot be squeezed out during tightening.
Oil sight glasses can also be used with vessels that are under pressure. Test series on the load capacity at overpressure and underpressure are available.
Assembly note:
Use fastening nuts for wall thicknesses below 4 mm.
The outer Ø of the oil sight glasses with the recessed hexagon is matched to the screw-in holes for pipe fittings DIN 3852.
The sealing ring is embedded in a radial and planar recess, thus the seal cannot be lost and cannot be squeezed out during tightening.
Oil sight glasses can also be used with vessels that are under pressure. Test series on the load capacity at overpressure and underpressure are available.
Assembly note:
Use fastening nuts for wall thicknesses below 4 mm.
Specifications
- : 14
- : M 20 x 1,5
- : 26
- l1 (mm): 8,5
- : 7,8
- : 23
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.