Ganter - Stainless steel aeration / deaeration screens Gewinde d1 G1/2
Item-No.: 13000044001
- Gewinde d1: G1/2
- Maschenweite: 100 µm
There is currently no further information available on this article.
Stainless steel ventilation / venting strainers are used in the construction of enclosures and devices. In an enclosure wall, they ensure pressure equalisation between the interior of the enclosure and the environment. Possible dirt and dust particles carried along by the mostly gaseous medium are prevented from exchanging according to the mesh size. This protects against soiling of the inside of the device and reduces the pollution of the environment by e.g. escaping dust. The outer Ø of the housing with the recessed hexagon is matched to the screw-in holes for pipe fittings DIN 3852. The sealing ring is embedded in a radial and flat-side recess, so that the seal cannot be lost and cannot be squeezed out when tightening. Assembly note: For wall thicknesses below 4 mm, use fixing nuts.
Specifications
- : 100
- : G 1/2
- : 26
- : 10
- l1 (mm): 8,5
- : 7,8
- : 23
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.