Ganter - Stainless steel handles, mounting from the back Griffdurchmesser d1 20 mm
Item-No.: 18000788001
- Griffdurchmesser d1: 20 mm
- Länge l1: 200 mm
There is currently no further information available on this article.
Stainless steel U-handles can be mounted from the rear side (form A) as well as from the operating side (form B). In this case, the mounting bolt is first screwed in on the machine side,then the handle is pushed on and secured laterally with the grub screw.
At the same time, the two mounting types allow mounting in pairs opposite each other, e.g. for doors (double handle). As a rule, a mounting bolt with special length l2 is required for this.
Due to the manufacturing process, special designs can be supplied even in comparatively small quantities.
At the same time, the two mounting types allow mounting in pairs opposite each other, e.g. for doors (double handle). As a rule, a mounting bolt with special length l2 is required for this.
Due to the manufacturing process, special designs can be supplied even in comparatively small quantities.
Specifications
- : 20
- : M 8
- : 15
- H (mm): 68
- l1 (mm): 200
- : 20
- : 22
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.