Go to home page
Phone: +49 7443 96729 0

Monday to Friday
08:00 to 12:00am and 02:00 to 05:00pm

Ganter - Thrust pieces, steel

Available in 6 variations

Thrust pieces, steel
Thrust pieces, steel
Thrust pieces, steel
Thrust pieces, steel

Available in 6 variations

  • Außendurchmesser d1: 12 mm - 40 mm

You are currently in the B2B area. If you switch to B2C, you will be automatically unsubscribed.
Do you really want to switch to B2C?

from

€1.42 

excl. VAT plus shipping costs

Choose your product variant
Back to category
Selection filter
Außendurchmesser d1
12 mm
40 mm
Variant table
available in 6 variations
There is currently no further information available on this article.
Thrust blocks DIN 6311 are used in conjunction with screws with thrust pins (grub screws DIN 6332, tommy screws DIN 6304, DIN 6306). They adapt to uneven or non-parallel surfaces and prevent the rotary movement of the screw from being transmitted to the workpiece. For easier assembly, the thrust piece is held so that the snap ring lies in the recess with the open side facing downwards.Then the screw is tilted as far as possible towards the open side of the snap ring and pressed in.

Specifications

  • : 12
  • : 4,6
  • : 10
  • : 7
  • : 2,5
  • e (mm): 2,1
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.