Halder - Wedge clamping segments, double wedge, clamping jaw flat, on both sides
Available in 2 variations
Wedge clamping segments are particularly suitable for horizontal and vertical multiple clamping. The wedge clamps have a compact design and thus enable clamping without interfering contours.
Material
Base body
- Tool steel, hardened, bright
Screw
- Tempered steel, quenched and tempered, grade 12.9
Spring
- Spring steel wire
Clamping jaws
- Tool steel, hardened, burnished and ground
Mounting
Mounting possible in threaded hole or with nut for T-slots for horizontal or vertical multiple clamping.
Operation
By screwing in the clamping screw, the two clamping jaws move outwards and press the workpieces against a fixed stop. In the double wedge version, a vertical clamping force is also achieved. Displacement of the wedge clamping segments at M 5 = ±0.5, M 8 = ±0.5, M 12 = ±1 and M 16 = ±1.5.
References
Further wedge clamping segments can be found in chapter €žMultiple clamping systems€Ÿ
Accessories
Nuts for T-slots (EH 23010.) have to be ordered separately.
Specifications
- : 85
- : 50
- : 41
- : M12
- : 36
- : 5
- : 48
- : 41
- : 30