Ganter - Stainless steel indexing plunger with pull ring, without indexing lock Bolzendurchmesser d1 4 mm
Item-No.: 05000730002
- Bolzendurchmesser d1: 4 mm
There is currently no further information available on this article.
Stainless steel indexing plungers with flange are fastened parallel to the indexing pin and are thus characterised by a particularly low overall height. The fastening hole pattern with slotted holes offers generous adjustment options, e.g. when used on aluminium profiles. The use of washers favours fastening via the slotted holes.
Form D has a reinforced pull eye and is therefore particularly suitable for remote actuation by cable.
The stainless steel versions allow the indexing plungers to be used in more aggressive environments.
Form D has a reinforced pull eye and is therefore particularly suitable for remote actuation by cable.
The stainless steel versions allow the indexing plungers to be used in more aggressive environments.
Specifications
- : 3
- : 12
- : 22
- : 6
- : 4
- : 14
- : 7
- : 4
- : 10
- : 14
- : 8
- : 4,5
- : 16,5
- : 3,3
- : 4
- l1 (mm): 4
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.