Ganter - Clamp fasteners, stainless steel
Available in 3 variations
Variant table
available in 3 variations
There is currently no further information available on this article.
Clamping latches are used to securely hold flaps, container lids and the like. Due to the dead centre override, they hold vibration-resistant. As a result of the elasticity of the clamping bracket, the parts to be connected are held together during clamping. The holding force given in the table is a guide value for the possible static tensile stress of the clamping bracket. Depending on the operating conditions, e.g. due to vibrations or impact stress, the holding force may be impaired. By means of the bore d3 and a safety pin, turnbuckles can be secured against unintentional release. The counter hook is included in the scope of delivery.
Specifications
- : 55
- : 550
- : 23
- : 14
- : 13
- : 30
- : 2
- : 3,2
- : 2,6
- : 11
- : 9
- : 9,5
- : 5
- : 12
- : 17
- : 44
- : 12,5
- l1 (mm): 102
- : 60
- l3 (mm): 34
- : 26
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.