Mechanical force gauge FA 500, Max N 500 N
Item-No.: 15001987001
In this bundle:
Wide jaw clampOpening width (inside the jaws): 0-6 mm, for tensile tests up to 500 N, thread... read more
Wide jaw clampOpening width (inside the jaws): 0-6 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of MaxEasy handling without tools, opening and closing of the jaws is done with attached knobs on the top. read less
Rope and thread tension clampOpening width (within jaws): 0-5 mm, for tensile tests up to... read more
Rope and thread tension clampOpening width (within jaws): 0-5 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of Max.Easy handling without tools, test specimen can simply be wrapped around the screw and fastened via the clamping screw read less
Standard small clampOpening width (within jaws): 0-7 mm, for tensile tests up to 500 N, thread... read more
Standard small clampOpening width (within jaws): 0-7 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of Max.Easy handling without tools, opening and closing of the jaws is done with attached turning knob on the top side Pre-adjustment of the jaw opening via attached screwsPretensioning by means of installed springs read less
Cable pull-off clampOpening width (within jaws): 1.5-6 mm, for tensile tests up to 500 N,... read more
Cable pull-off clampOpening width (within jaws): 1.5-6 mm, for tensile tests up to 500 N, thread M6 Overload safety: 150 % of Max.Easy handling without tools, DUT can simply be inserted into the matching recess and tested. read less
Quality force measuring clamp in the lower force range with high variability for fast adaptation... read more
Quality force measuring clamp in the lower force range with high variability for fast adaptation to a wide range of test objectsSolid design for high clamping forcesMany different jaw types selectable- Jaws with pyramid grip as standard, W×H 32×20 mm- [[1]] Jaws with wave grip as well as special designsModular design allows quick adaptation, expansion and cleaning of the clampThe practical threaded rods with hexagon socket allow the clamp to be quickly adapted to your own requirements, test objects, application environments, e.g. test bench or measuring device, etcCan be used with all SAUTER force gauges or test rig systemsFor fastening the clamp to the force gauge, there is an M6 thread on the top of the clampFor tensile and compression tests up to 500 NOverload safety: 150 % of [Max]Scope of delivery: 1 clamp with 2 jaws with pyramid gripDimension drawing see www.sauter.eu read less
Strap tension clampOpening width (inside jaws): 0-6 mm, for tensile tests up to 500 N, thread... read more
Strap tension clampOpening width (inside jaws): 0-6 mm, for tensile tests up to 500 N, thread M6. Overload safety: 150 % of Max. Easy handling without tools, opening and closing of the jaws is done with the attached levers. read less
Strap tension clampOpening width (inside the jaws): 0-4 mm, for tensile tests up to 500 N,... read more
Strap tension clampOpening width (inside the jaws): 0-4 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of Max.Easy handling without tools, the opening and closing of the jaws is done with attached lever on the top. read less
Wedge clampOpening width (within jaws): 0-6 mm, for tensile tests up to 500 N, thread M6Overload... read more
Wedge clampOpening width (within jaws): 0-6 mm, for tensile tests up to 500 N, thread M6Overload safety: 150 % of Max.Easy handling without tools, test specimen can simply be inserted into the open clamp. This closes automatically during a tensile test. read less