Ganter - Clamping fasteners, steel
Item-No.: 05000740001
There is currently no further information available on this article.
Clamping latches are used to securely hold flaps, container lids and the like. Due to the dead center crossing, they hold vibration-resistant. As a result of the elasticity of the clamping hook, the parts to be connected are held together during clamping.
The holding force specified in the table is a guide value for the possible static tensile stress on the clamping fastener. Depending on the operating conditions, e.g. due to vibrations or impact stress, the holding force may be impaired.
Due to the space conditions, cap screws with a low head or pan head screws are recommended for fastening.
The holding force specified in the table is a guide value for the possible static tensile stress on the clamping fastener. Depending on the operating conditions, e.g. due to vibrations or impact stress, the holding force may be impaired.
Due to the space conditions, cap screws with a low head or pan head screws are recommended for fastening.
Specifications
- : 50
- : 500
- : 17
- : 10
- : 14
- : 13,5
- : 30
- : 56
- : 11
- D (mm): 5,1
- d (mm): 5,1
- H (mm): 18
- h (mm): 18
- l1 (mm): 89
- : 43
- l3 (mm): 33
- : 53
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.