Ganter - Clamping arms with slotted hole, for swing clamps GN 875 / GN 876
Available in 3 variations
Variant table
available in 3 variations
There is currently no further information available on this article.
Clamping arms with oblong hole are designed as accessories for swing clamps. The slotted hole, in conjunction with the two flank disks, allows any positioning of application-specific pressure elements. The angular position of the clamping arm can be set as required when mounting on the swing clamps. When tightening the screw, the piston rod must not experience any torque, therefore the clamping arm must be held against rotation. The scope of delivery includes a cap screw DIN 912 and a washer ISO 7092 for fastening to the swing clamp, as well as two flank washers for fastening the pressure screw.
Specifications
- : 6,5
- : 18
- : 14
- : M 6
- : 8,5
- : 25
- : 16
- : 6,5
- : 11,3
- A (mm): 20
- a (mm): 20
- L (mm): 64,6
- l (mm): 64,6
- m (mm): 50
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.