Manual shore test stand SAUTER TI-AC
Item-No.: 15003408001
Lever test stand for reproducible hardness tests with base plate made of glass
Lever test stand for reproducible hardness tests with base plate made of glass
Suitable for Shore hardness testing of plastics, leather, etc.
Glass plate: High measuring accuracy due to the stronger hardness of the glass base plate
Mechanical construction: Robust design enables precise measuring movements
Leveling device: For precise alignment of the base plate, e.g. for inhomogeneous test objects
Hardness tester not included in delivery
Operation
:1. the SAUTER HB or HD hardness tester is mounted in the hanging position2
. The test object is placed on the round test table directly under the measuring tip of the hardness tester3
. By pressing down the lever, the test weight is released, which then presses the measuring tip into the test object with its weight (cf. table)The
accuracy of the measurement result is about 25% higher with this test stand than with a manual measurement
:1. the SAUTER HB or HD hardness tester is mounted in the hanging position2
. The test object is placed on the round test table directly under the measuring tip of the hardness tester3
. By pressing down the lever, the test weight is released, which then presses the measuring tip into the test object with its weight (cf. table)The
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.