Ganter - Stainless steel ball studs
Available in 17 variations
Available in 17 variations
- Bolzendurchmesser d1: 8 mm - 20 mm
- Länge l1: 10 mm - 75 mm
Variant table
available in 17 variations
There is currently no further information available on this article.
Stainless steel ball carrying bolts are quick and easy to use carrying elements. By pressing the red aluminium button, the locking of the locking balls is released and the support pin can be moved out of or into the locating hole. The shackle can be swivelled by at least 180°, whereby a safety bar protects against unintentional actuation. Depending on the direction of pull, the ball support pin can rotate freely through 360° in the locating bore. Permanent fasteners such as eyebolts are no longer required on the workpiece. For the application, mounting holes with d1 H11 are sufficient, provided that the material strength is adequate. In addition, locating bushes are available. Further application guidelines can be found in the operating instructions which are enclosed with each ball bearing pin (see also www.ganter-griff.de/service).
Specifications
- : 1,5
- : 1,2
- : 0,5
- : 8
- : 9,35
- : 21,5
- : 9,9
- : 87,5
- : 38,5
- : 25,7
- : 27
- : 9,5
- : 30
- : 20
- : 49
- l1 (mm): 35
- : 8,75
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.