Go to home page
Phone: +49 7443 96729 0

Monday to Friday
08:00 to 12:00am and 02:00 to 05:00pm

Ganter - Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)

Available in 60 variations

Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)
Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)
Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)
Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)
Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)
Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)
Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)
Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)
Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)
Stainless steel adjustable feet, with adjustment sleeve, covered thread, spanner flat at the bottom, material no. 1.4301 (A2)

Available in 60 variations

  • Fußdurchmesser d1: 60 mm - 80 mm
  • Length l3: 110 mm - 259 mm
  • :
  • :

You are currently in the B2B area. If you switch to B2C, you will be automatically unsubscribed.
Do you really want to switch to B2C?

from

€23.60 

excl. VAT plus shipping costs

Choose your product variant
Back to category
Selection filter
Preis
23 €
93 €
Fußdurchmesser d1
60 mm
80 mm
Length l3
110 mm
259 mm
Fußteller
Gewinde d2
Variant table
available in 60 variations
There is currently no further information available on this article.
Stainless steel adjustable feet are designed for use in aggressive environments. The wide range of possible combinations of foot plate and adjustment spindle variants make these swivel feet universally applicable. The foot plates with rubber pads protect sensitive surfaces and reduce lateral slippage. Form B0 can also be attached to the installation surface via two drill holes. The swivel feet are supplied fully assembled and cannot be dismantled.

Specifications

  • : D0, ohne Gummiauflage
  • : W, mit Verstellhülse, abgedecktes Gewinde, Schlüsselfläche unten
  • : 60
  • : M 16
  • : 24
  • : 2,5
  • : 12
  • : 20
  • l3 (mm): 110
  • m (mm): 48
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.