Go to home page
Phone: +49 7443 96729 0

Monday to Friday
08:00 to 12:00am and 02:00 to 05:00pm

Halder - Ball Thrust Screws, without head, full ball and hexagon socket, full ball, steel

Available in 6 variations

Ball Thrust Screws, without head, full ball and hexagon socket, full ball, steel
Ball Thrust Screws, without head, full ball and hexagon socket, full ball, steel
Ball Thrust Screws, without head, full ball and hexagon socket, full ball, steel
Ball Thrust Screws, without head, full ball and hexagon socket, full ball, steel

Available in 6 variations

  • Länge l1: 6 mm - 17 mm
  • :

You are currently in the B2B area. If you switch to B2C, you will be automatically unsubscribed.
Do you really want to switch to B2C?

from

€1.89 

excl. VAT plus shipping costs

Choose your product variant
Back to category
Selection filter
Länge l1
6 mm
17 mm
Gewinde d1
Variant table
available in 6 variations
There is currently no further information available on this article.

For positioning and clamping, tensioning or supporting even of non-parallel surfaces.

The hexagon socket drive enables optimum power transmission. The drive forces are not transmitted through edges (e.g. with the hexagon socket) but through surfaces. The optimum power transmission reduces tool wear and thus increases tool life.

Material

Ball

  • Ball bearing steel, hardened

Screw

  • Tempered steel, 1200 ±100 N/mm2

Notes

Ball not secured against rotation.

Special design on request.

References

Thread locking on request, see appendix - Technical data -

Specifications

  • : 4,5
  • : 10
  • : 3
  • : 250
  • : M5
  • l1 (mm): 12
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.