Halder - Positioning rings, for ride-on clamps Höhe h1 7 mm
Item-No.: 17000250001
- Höhe h1: 7 mm
There is currently no further information available on this article.
The positioning ring is an accessory for the ride-on clamps 23310.0050-0058, 23310.0083-0088 and 23310.0070.
The positioning ring is clamped onto the ride-on clamp's guide bolt after it has been aligned and then has the effect of always clamping to exactly the same point during repeated clamping operations. The positioning ring can be adjusted 360° on the ride-on clamp. After fastening, the clamping claw can be swivelled 110° to the left or right (only with the swivelling versions).
Material
- Steel, burnished
Assembly
To assemble the positioning ring, the clamping claw must be pulled off the ride-on clamp.
Specifications
- : 40
- : 5
- : 28
- : 7
- : 16
- B (mm): 35
- b (mm): 35
- e (mm): 5000438009
- l1 (mm): 43,5
- : 17,5
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.