Halder - ride-on clamp, swivelling, low design, size 44, with eccentric clamping lever
Item-No.: 17000242001
There is currently no further information available on this article.
The ride-on clamp is a universal mechanical clamping element for quick and convenient changing and clamping of workpieces by means of manually swivelling clamping claw.
The clamps have the following advantages:
- Quick clamping by hand via clamping screw or adjustable eccentric quick clamp.
- Easy and quick workpiece change by swinging away the clamping claw to the left or right.
- Low design, therefore low space requirement when clamping.
- Easy adaptation even to large clamping heights with the height cylinders.
Material
- Case-hardened case-hardened steel, burnished and ground
Assembly
The ride-on clamps can be attached in two ways:
- with a nut for T-slots DIN 508 in a T-slot
- with the grub screw directly into the plate, e. g. e.g. of a fixture
The cylinder must be in full contact.
References
The clamping height can be increased with height cylinders as well as with washers.
Specifications
- : 42
- : 44
- : M12
- : 30
- : 25
- : 54
- : 15
- : 28
- : 18
- : 59
- l1 (mm): 61
- : 40
- l3 (mm): 100
- : 5
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.