Ganter - Threaded clamping rings, steel
Available in 12 variations
Available in 12 variations
- Außendurchmesser d1: 20 mm - 55 mm
- :
Variant table
available in 12 variations
There is currently no further information available on this article.
Threaded clamping rings correspond to slotted adjusting rings in terms of their external dimensions. However, the bore is provided with an internal thread so that the clamping ring can be screwed on like a nut, for example on a spindle thread, in order to limit the adjustment travel or the screw-in depth. Clamping is then achieved by reducing the slot height without damaging the thread. The thread d3 is designed as a through hole for sizes d1 = 20 to 32, and as a blind hole for sizes d1 = 42 and larger.
Specifications
- : 22
- : M 10
- : M 3
- : 0,8
- B (mm): 9
- b (mm): 9
- : 2,1
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.