Ganter - Stainless steel adjustable feet with mounting holes, Hygienic Design Fußdurchmesser d1 100 mm
Item-No.: 05001262001
- Fußdurchmesser d1: 100 mm
- Gewinde d2: M16
- l1: 175 mm
There is currently no further information available on this article.
Stainless steel leveling feet with mounting holes are certified according to the guidelines of the EHEDG and 3-A Sanitary Standards, Inc. and are therefore ideally suited for use in hygienic areas. The floor seal protects the space under the foot plate from contamination. For this purpose, the foot must be screwed on by means of the fastening holes and pressed on accordingly. Hygienic fasteners, such as screws and nuts, as well as correct positioning of the mounting holes are mandatory. The sealing ring above the adjustment sleeve enables a dead space-free fastening. The moving components are sealed against the environment by the wiper or the ball seal. The high surface quality prevents the adhesion of dirt and facilitates cleaning. The values given in the table for the static load capacity apply to a pure compressive load perpendicular to the joint foot. The additional bending and buckling stresses that frequently occur in practice lead to a reduction in the load capacity and must be taken into account accordingly.
Specifications
- : 18
- : 22
- : 30
- : 100
- : M 16
- : 28
- : 12
- k (mm): 69
- l1 (mm): 175
- : 19
- l3 (mm): 35
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.