Go to home page
Phone: +49 7443 96729 0

Monday to Friday
08:00 to 12:00am and 02:00 to 05:00pm

Ganter - Adjustment plates

Available in 5 variations

Adjustment plates
Adjustment plates
Adjustment plates
Adjustment plates

Available in 5 variations

  • Durchmesser d1: 20 mm - 50 mm

You are currently in the B2B area. If you switch to B2C, you will be automatically unsubscribed.
Do you really want to switch to B2C?

from

€2.88 

excl. VAT plus shipping costs

Choose your product variant
Back to category
Selection filter
Durchmesser d1
20 mm
50 mm
Variant table
available in 5 variations
There is currently no further information available on this article.
Adjustment plates are used in combination with circular vials, form A. The mounting holes are offset by 120° so that the circular vials and the mounting plate can be aligned with the mounting surface. An alignment ball on the underside of the adjustment plate serves as a tilting point. The desired position can thus be achieved by selective tightening of the screws so that the bubble is located within the marking ring when horizontal alignment is achieved.

Specifications

  • : 20
  • : 17
  • : 1,8
  • : 3,2
  • : 1,2
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.