Halder - Ride-on clamp, swivelling, size 40, with adjustable clamping lever with axial bearing Durchmesser d1 40 mm
Item-No.: 17000239001
- Durchmesser d1: 40 mm
- Hub: 20 mm
There is currently no further information available on this article.
The ride-on clamp is a universal mechanical clamping element for quick and comfortable changing and clamping of workpieces by means of a manually swivelling clamping claw.
The clamps have the following advantages:
- Quick clamping by hand via the clamping screw, the adjustable clamping lever or the eccentric clamping lever.
- Easy and quick workpiece change by swivelling the clamping claw to the left or right. A positioning ring allows a stepless adjustment.
- The use of a positioning ring allows a pinpoint repeat clamping. Here h1 min. increases by 7mm (stroke minus 7mm).
- Compact design, therefore there is only a small space requirement when clamping.
- Easy adjustment even to large clamping heights by the height cylinders.
Material
- Case-hardened case-hardened steel, burnished and ground
Assembly
The ride-on clamps can be attached in two ways:
- with a nut for T-slots DIN 508 in a T-slot
- with the grub screw directly into the plate, e. g. e.g. of a fixture
The cylinder must be in full contact.
The clamping height cannot be exceeded by the height limitation.
References
The clamping height can be increased with height cylinders as well as with washers and reduced by clamping inserts.
Specifications
- : 40
- : 40
- : M12
- : M12
- : 70
- : 50
- : 73
- : 15
- : 82
- : 93
- : 73
- : 17
- : 93
- : 108
- D (mm): 40
- d (mm): 40
- l1 (mm): 75
- : 55
- l3 (mm): 43
- : 20
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.