Ganter - Sealing rings, hygienic design Material Hydrierter Acrylnitril-Butadien-Kautschuk
Item-No.: 06000004005
- Material: Hydrierter Acrylnitril-Butadien-Kautschuk
- d1: 16 mm
Components with cylindrical mounting surfaces, which are mounted in hygienic areas, can be fitted tightly and without dead space using sealing rings.
When delivered or unassembled, the sealing rings have the "actual dimensions" given in the table. In order to be able to guarantee a secure fit and thus a reliable seal, an installation space must be provided on the component as shown in the sketch. This ensures that the sealing ring is subjected to the necessary pressure in the assembled state without being overloaded. All surfaces in contact with the sealing ring should also have a surface finish of at least Ra 0.8 µm.
Standard elements which are supplied with sealing rings are listed in the table and can be ordered individually in the event of maintenance.
When delivered or unassembled, the sealing rings have the "actual dimensions" given in the table. In order to be able to guarantee a secure fit and thus a reliable seal, an installation space must be provided on the component as shown in the sketch. This ensures that the sealing ring is subjected to the necessary pressure in the assembled state without being overloaded. All surfaces in contact with the sealing ring should also have a surface finish of at least Ra 0.8 µm.
Standard elements which are supplied with sealing rings are listed in the table and can be ordered individually in the event of maintenance.
Specifications
- : 85, 85 ±5 Shore A
- : 16
- : 15,25
- : 12
- : 16,8
- : 16,35
- : Hydrierter Acrylnitril-Butadien-Kautschuk
- : 2
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.