Halder - Retaining cables, stainless steel, with retaining clip and screw-on eyelet, thermoplastic PA 6, sheathed
Available in 24 variations
Variant table
available in 24 variations
There is currently no further information available on this article.
These retaining cords are designed to attach to EH 22340., EH 22350., EH 22370. and EH 22380. ball lock pins and EH 22360. and EH 22400. socket pins and act as an anti-loss device.
Material
Eye
- Rustproof steel
Holding rope
- Rustproof steel
Sheathing holding rope
- Thermoplastic PA 6 sheathed, clear
Assembly
Assembly of the retaining clips (Fig. 5 /6) on the ball lock pin using a soft-face hammer. Disassembly by levering out with screwdriver.
In the case of the thermoplastic design (Fig. 7), cut off protruding ends without burrs after fastening.
Spiral design (Fig. 8) with very long effective length.
Notes
Special design on request.
Designs Fig. 3 and Fig. 4 comply with MIL-DTL-83420.
For ball lock pins, simple design
.Specifications
- : 5/6
- : 80
- : PA 6, schwarz
- L (mm): 150, 150
- l (mm): 150
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.