Go to home page
Phone: +49 7443 96729 0

Monday to Friday
08:00 to 12:00am and 02:00 to 05:00pm

Halder - Cross handles, with axial bearing, with screw

Available in 8 variations

Cross handles, with axial bearing, with screw
Cross handles, with axial bearing, with screw
Cross handles, with axial bearing, with screw
Cross handles, with axial bearing, with screw
Cross handles, with axial bearing, with screw
Cross handles, with axial bearing, with screw
Cross handles, with axial bearing, with screw
Cross handles, with axial bearing, with screw
Cross handles, with axial bearing, with screw
Cross handles, with axial bearing, with screw

Available in 8 variations

  • Durchmesser d1: 40 mm - 80 mm
  • Länge L: 15 mm - 50 mm
  • :

You are currently in the B2B area. If you switch to B2C, you will be automatically unsubscribed.
Do you really want to switch to B2C?

from

€15.35 

excl. VAT plus shipping costs

Choose your product variant
Back to category
Selection filter
Preis
15 €
23 €
Durchmesser d1
40 mm
80 mm
Länge L
15 mm
50 mm
Gewinde d2
Variant table
available in 8 variations

The advantages of the axial bearing:

  • Doubled clamping force with the same handle size due to reduction of surface friction.
  • Protection of the component due to fixed contact surface.
  • Lower setting behavior due to higher preload force in the bolt or thread. thread.

Material

Handle

  • Thermoplastic PA

Inner part

  • Steel, nitrided, burnished

Screw

  • Steel, burnished, grade 8.8

Specifications

  • : 80
  • : 40
  • : M6
  • : 24
  • : 27
  • : 15
  • : 15
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.