Ganter - Indexing plunger, steel, with pull ring, without indexing lock
Available in 26 variations
Available in 26 variations
- Bolzendurchmesser d1: 3 mm - 10 mm
- :
- :
Variant table
available in 26 variations
There is currently no further information available on this article.
Indexing plungers are characterised by their small dimensions. The insensitivity to misalignment and positioning errors of the indexing holes make these indexing plungers universally applicable. Form A with pull ring can be actuated by finger in inaccessible places. If the indexing plungers are to be installed in places that cannot be reached by hand, form D with a pull ring can be actuated remotely. This is possible, for example, with a retaining cable 05001191000. During installation, the max. tightening torques specified in the table should not be exceeded when tightening the lock nut.
Specifications
- : 2
- : 3
- : 12
- : 6
- : 4
- : M 6
- : 14
- : 6
- : 10
- : 33,4
- : 12,9
- : 4,5
- e (mm): 6,9
- l1 (mm): 33,5
- : 4
- l3 (mm): 12
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.