Halder - Retaining cables, with clamping, latching mechanism on both sides, thermoplastic PA 6
Available in 2 variations
Variant table
available in 2 variations
There is currently no further information available on this article.
These retaining ropes are designed for attachment to the ball locking bolts EH 22340., EH 22350., EH 22370. and EH 22380. as well as the ball locking bolts EH 22360. and socket pins EH 22400. and serve as an anti-loss device.
Material
Holding rope
- Thermoplastic PA 6, grey
Sheathing holding rope
- Thermoplastic PA 6, grey
Assembly
Assembly of the retaining clips (Fig. 5 /6) on the ball lock pin using a soft-face hammer. Disassembly by levering out with screwdriver.
In the case of the thermoplastic design (Fig. 7), cut off protruding ends without burrs after fastening.
Spiral design (Fig. 8) with very long effective length.
Notes
Special design on request.
Designs Fig. 3 and Fig. 4 comply with MIL-DTL-83420.
Specifications
- : 80
- : PA 6, grau
- L (mm): 150, 150
- l (mm): 150
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.