Ganter - Ring nuts, stainless steel A4 Innengewinde d1 M10
Item-No.: 01000278001
- Innengewinde d1: M10
There is currently no further information available on this article.
The following application guidelines must be observed for stainless steel ring nuts, also with regard to the load capacity specifications listed in the table: The ring nut must be fully screwed on and rest fully on the bearing surface. The mating thread must be as long as the length of the nut thread and the material of the bolt must be sufficient for the load capacity of the ring nut. Further application guidelines are contained in the operating instructions which are enclosed with each ring nut (see also at www.ganter-griff.de/service). The official standard sheet still provides for the sizes M8, M30, M36, M42, M48, M56, M64, M72 x 6, M80 x 6 and M100 x 6.
Specifications
- : 2300
- : 1700
- : 1150
- : M 10
- : 25
- : 45
- : 25
- e (mm): 10
- H (mm): 45
- h (mm): 45
- k (mm): 10
- m (mm): 12
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.