Ganter - Folding handle handwheels, safety folding handle
Available in 32 variations
Available in 32 variations
- Bohrungsdurchmesser d2: 12 mm - 20 mm
- Handraddurchmesser d1: 125 mm - 200 mm
- :
- Color:
Variant table
available in 32 variations
There is currently no further information available on this article.
The handwheels are used when the handle must not be locked in the operating position.
To bring the handle into this position, it must first be swivelled through 90° against a torsion spring. It is then pushed into a detent in the axial direction against spring force. Fixed in this way and maintaining the axial force, the handle can be cranked. After "releasing", the compression spring pushes the handle out of the lock and the torsion spring swivels it back again.
To bring the handle into this position, it must first be swivelled through 90° against a torsion spring. It is then pushed into a detent in the axial direction against spring force. Fixed in this way and maintaining the axial force, the handle can be cranked. After "releasing", the compression spring pushes the handle out of the lock and the torsion spring swivels it back again.
Specifications
- : B, ohne Nabennut
- : 22
- : 125
- : 12
- : 23
- : 31
- Color: SR
- B (mm): 24,5
- H (mm): 4
- l1 (mm): 18
- : 45
- l3 (mm): 62
- : 44,5
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.