Halder - Ride-on clamp, swivelling, size 25, with adjustable clamping lever with axial bearing
Item-No.: 17000236001
There is currently no further information available on this article.
The ride-on clamp is a universal mechanical clamping element for quick and convenient changing and clamping of workpieces by means of a manually swivelling clamping claw.
The clamps have the following advantages:
- Quick clamping by hand via clamping screw, adjustable clamping lever or adjustable eccentric quick clamp.
- Easy and quick workpiece change by swinging away the clamping claw to the left or right.
- Compact design, therefore low space requirement when clamping.
- Easy adaptation even to large clamping heights with the height cylinders.
Material
- Case-hardened, burnished and ground steel
Assembly
The ride-on clamps can be fixed in two ways:
- with a nut for T-slots DIN 508 (EH 23010.) in a T-slot
- with the grub screw directly into the plate, e. g. e. g. of a fixture
The cylinder must be in full contact.
References
The clamping height can be increased with height cylinders EH 23310. as well as with washers EH 1007. and reduced by the clamping inserts, e. g. EH 22730.
Specifications
- : 5
- : 26
- : 25
- : M8
- : M8
- : 35
- : 30
- : 44
- : 10
- : 60
- : 10
- : 49
- : 74
- l1 (mm): 49,5
- : 35
- l3 (mm): 28
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.