Halder - Ride-on clamp, pushable, size 40, with adjustable clamping lever with axial bearing Durchmesser d1 40 mm
Item-No.: 17000247001
- Durchmesser d1: 40 mm
- Hub: 20 mm
There is currently no further information available on this article.
The ride-on clamp pushable is used, among other things, when swivel movements are not possible due to the workpiece.
The clamps have the following advantages:
- Easy and quick workpiece change by moving the clamping claw forward or backward.
- The clamping range in horizontal direction is between l1 min. and l1 max.
- For workpiece change, the clamping claw can be shifted from l1 max. to the rear by the dimension l2.
- Quick clamping by hand via the clamping screw, the adjustable clamping lever or the eccentric clamping lever on both sides.
- The use of the positioning ring 23310.0350 enables a fixation of the clamping position. Here h1 min. increases by 7mm (stroke minus 7mm).
- Compact design, therefore low space requirement when clamping.
- Easy adaptation also to large clamping heights with the height cylinders.
Material
- Case-hardened case-hardened steel, burnished and ground
Assembly
The ride-on clamps can be attached in two ways:
- with a nut for T-slots DIN 508 in a T-slot
- with the grub screw directly into the plate, e. g. e.g. of a fixture
The cylinder must rest fully.
Operation
- Push the clamping claw backwards.
- Insert the workpiece.
- Push the clamping claw forwards.
- Adjust the clamping position of the clamping claw via the knurled screw.
- Secure / counter the clamping position with the knurled nut.
References
The clamping height can be increased with height cylinders as well as with washers and reduced by clamping inserts.
Specifications
- : 20
- : 30
- : 40
- : M12
- : 90
- : 70
- : 95
- : 15
- : 82
- : 38
- : 107
- : 90
- : 13
- : 115
- : 55
- : 108
- : 30
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar
There aren't any asked questions yet.