Go to home page
Phone: +49 7443 96729 0

Monday to Friday
08:00 to 12:00am and 02:00 to 05:00pm

Ganter - Knurled nut with thread, steel

Available in 10 variations

Knurled nut with thread, steel
Knurled nut with thread, steel
Knurled nut with thread, steel
Knurled nut with thread, steel
DIN 6303

Available in 10 variations

  • Gewinde d1: 5 mm - 12 mm
  • :

You are currently in the B2B area. If you switch to B2C, you will be automatically unsubscribed.
Do you really want to switch to B2C?

from

€1.17 

excl. VAT plus shipping costs

Choose your product variant
Back to category
Selection filter
Preis
1 €
6 €
Gewinde d1
5 mm
12 mm
Form
Variant table
available in 10 variations
There is currently no further information available on this article.
The pin hole d5 in the knurled nuts DIN 6303 is intended for the use of dowel pins or grooved pins. Knurled nuts DIN 6303 with bore H7 and size M12 are not provided for on the official standard sheet. In addition, the knurl pitch is larger than in the DIN standard and therefore has a better grip.

Specifications

  • : B 5
  • : 14
  • : 20
  • : 1,5
  • e (mm): 2,5
  • H (mm): 12
  • L (mm): 7
  • h (mm): 12
  • k (mm): 8
  • l (mm): 7
There is currently no further information available on this article.
There is currently no further information available on this article.
Zu diesem Artikel sind aktuell keine technischen Zeichnungen verfügbar

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.